Control Module Harness Testing
- Remove the test loop.
- Remove the SVS harness (6) from the module
Courtesy of BMW OF NORTH AMERICA, INC.
- Remove the fiber optical insert (2) from the SVS harness plug (1)
Courtesy of BMW OF NORTH AMERICA, INC.
- Plug a MOST attachment housing P/N 663 125
Courtesy of BMW OF NORTH AMERICA, INC.
- Into the MOST wiring harness
Courtesy of BMW OF NORTH AMERICA, INC.
- Plug the free end of the MOST wiring extension cable into the MOST attachment housing.
- Follow the DISplus/GT1 test module instructions
Courtesy of BMW OF NORTH AMERICA, INC.