Metal FCD Clutches:

Removal: 

Metal quick-release couplings can only be opened with special tool 32 1 300.

Fig 1: Special Tool (32 1 300)

Courtesy of BMW OF NORTH AMERICA, INC.

Slide special tool 32 1 300 between metal head (1) and rubber lip (2) of quick-release coupling.

Fig 2: Special Tool (32 1 300) And Tool Installation Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Slide in special tool 32 1 300 as far as it will go. Quick-release coupling unlocks with a light click.

Then pull off coupling and tool towards top.

Fig 3: Special Tool (32 1 300) And Coupling Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Remove tool.

Press quick-release coupling into steering gear.

Quick-release coupling must snap into place with an audible click.

Fig 4: Quick-Release Coupling Installation Direction

Courtesy of BMW OF NORTH AMERICA, INC.