Scan Tool Display
Example: A fault was induced into a 1998 750iL by removing the wire connector from Air Mass Meter. Using an aftermarket scan tool the following information can be displayed:
SCAN TOOL DISPLAY
| DIAG. TROUBLE CODES | |
|---|---|
| ECU: | $ 12 (Engine) |
| Number of DTCs: | 1 |
| *P0100 | Manufacture controlled fuel and air metering |
| ENTER | FREEZE FRAME |
DTC DATA STREAM
| DTC | P0100 |
| ENGINE SPD | 905 RPM |
| ECT | 160F |
| VEHICLE SPD | 0 MPH |
| ENGINE LOAD | 3.9% |
| FUEL STAT 1 | OL |
| FUEL STAT 2 | OL |
| ST FT 1 | 0.0% |
| LT FT 1 | 1.6% |
| ST FT 2 | 0.0% |
| LT FT 2 | 3.1% |