32 00... Move vehicle into normal position

Necessary Preliminary Tasks: 

• Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - (E60)
• Version with air spring system: 
  • Carry out ride-height-calibration.
  • Pull fuse(s) for air supply unit control unit.
• Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary.
• Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - E60 ) into vehicle.
• Determine vehicle ride height. Refer to RIDING HEIGHT .
  NOTE: If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - E60 ), the vehicle must be repaired (coil spring/leakage).