LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2005 >> 545i Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3473 (General Electrical System - Repair) >> Control Units, Modules, Sensors, Aerials >> 61 35... Overview, rain sensor (additional work when replacing the windscreen/sensor replacement)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 35... Overview, rain sensor (additional work when replacing the windscreen/sensor replacement)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor/Encoding/programming necessary When replacing the sensor/Initialization required Connecting the diagnosis system required
Condensation sensor
square 30 x 20 mm
Yes No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types
square
60 x 40 mm
No Yes - Yes Yes
RLS
approximately ø 50 mm
No
(new substitute visuals  required)
- No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
RLPSS (Rain, light and precipitation solar sensor)
(Designation is located on the back of the sensor)
approximately ø 50 mm
Yes Yes - Yes Yes
RLS (vehicle with no HUD) 
(Designation is located on the back of the sensor)
approximately ø 50 mm
No
(new substitute visuals  required)
- No Yes Yes
RLSS (vehicle with HUD  )
(Designation is located on the back of the sensor)
approximately ø 50 mm
Yes Yes - Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types
square 60 x 40 mm
No Yes Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types
approximately ø 35 mm
No No - Yes Yes
all types
approximately ø 50 mm
Yes Yes - Yes Yes
Only for F25: 
RLS
approximately ø 50 mm
No
(new substitute visuals  required)
- No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types
approximately ø 35 mm
No No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all up to 03/2014  except SBS (01)
(Designation is located on the back of the sensor)
approximately ø 35 mm
No No Yes Yes
SBS (01)
(Designation is located on the back of the sensor)
approximately ø 35 mm
No No No No
All as from 03/2014 
approximately ø 35 mm
No No No No

BMW i: 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types
approximately ø 35 mm
No No No No

MINI (all): 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types
square 60 x 40 mm
No Yes Yes Yes
all types
approximately ø 35 mm
No No No No

Rolls-Royce (all): 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types
square 60 x 40 mm
No Yes Yes Yes
all types
approximately ø 35 mm
No No Yes Yes
all types
approximately ø 50 mm
Yes Yes Yes Yes