12 90 Control Unit Housing
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS (CONTROL UNIT HOUSING)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Assembly of upper and lower sections | E32 / E34 / E36 | 5 Nm | ||
| 2AZ Center section to body | E32 / E34 | 3 Nm | ||
| 3AZ Control unit holder in E box | E36 | 5 Nm | ||
| 4AZ Control unit box cover | E38 / E39 / E52 | 4 Nm | ||
| E46 | 6 Nm | |||
| E53 / E36/7 / E54 | 3 Nm | |||
| 5AZ Electronics box to firewall | E65 | Plastic screw | 6 Nm |