32 00... Chassis/Wheel Alignment Check Procedure
"ID678103"
| Check adherence to test conditions | ||||||
| I V |
||||||
| Position vehicle on measuring stand | ||||||
| I V |
||||||
| Measure vehicle ride height | OK -> | Carry out chassis/wheel alignment check with ride-height measurement without load | ||||
| Read off set point value in KDS Tolerance -20/+40 mm per wheel permissible Difference between left/right max. 10 mm permissible |
||||||
| Not OK/no data I V |
||||||
| Move vehicle into normal position | ||||||
| Introduce load and measure ride heights | ||||||
| Read off set point value in KDS Tolerance ± 10 mm per wheel permissible Difference between left/right max. 10 mm permissible |
Not OK -> | |||||
| OK I V |
Check suspension for damage, repair if necessary | |||||
| Move vehicle into design position | <- Not OK | |||||
| Add/distribute weights and measure ride heights | ||||||
| Read off set point value in KDS Tolerance ± 2 mm per wheel permissible Difference between left/right max. 2 mm permissible | ||||||
| I V |
||||||
| Carry out KDS chassis/wheel alignment check with load up to design position |