61 31 299 Removing and Installing/Replacing Clutch Switch Module

Necessary preliminary tasks: 

• Remove trim panel for pedal assembly  . See 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS

Lever out clutch switch module (1) from clutch master cylinder (2) with screwdriver.

Unlock plug (4) and disconnect from housing (3).

Fig 1: Identifying Clutch Master Cylinder, Clutch Switch Module & Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clutch switch module is secured against incorrect installation.

Clutch switch module must snap audibly into place.

Fig 2: Identifying Clutch Switch Module

Courtesy of BMW OF NORTH AMERICA, INC.