32 00... Moving Vehicle Into Normal Position

Necessary preliminary tasks: 

• Check compliance with test conditions  , bring vehicle to a stop if necessary. See 32 00... TEST CONDITIONS FOR CHASSIS/WHEEL ALIGNMENT CHECK .
• Version with air spring system: Carry out ride-height-calibration  . See 37 12 012 CARRY OUT RIDE-HEIGHT-CALIBRATION .
• Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
• Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle
• Determine vehicle ride height  . See 31 33 095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLE .
  NOTE: If the vehicle ride height is not inside the tolerance (refer to FRONT AXLE - TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).