32 13... Fitting Repair Kit For FCD Coupling

Special tools required:

Remove FCD coupling.

Only following parts can be replaced on coupling head:

IMPORTANT: Support ring and O-ring must not be mixed up!
Always fit repair kit for FCD coupling completely.

Fig 1: Identifying FCD Coupling Parts

Courtesy of BMW OF NORTH AMERICA, INC.

Press in special tool 32 1 023 as far as it will go in connecting piece on hydraulic steering gear. Then pull out again.

Fig 2: Identifying Special Tool (32 1 1023)

Courtesy of BMW OF NORTH AMERICA, INC.

Remove spring ring (1) from special tool 32 1 023 .

Fig 3: Identifying Special Tool (32 1 1023)

Courtesy of BMW OF NORTH AMERICA, INC.

Lay new spring ring (1) in special tool 32 1 021 .

Using special tool 32 1 022 , press spring ring (1) into connection. In so doing, press through special tool as far as it will go.

Installation:

Bore hole in special tool 32 1 021 is conical. Special tool must rest with stepped side securely on connection of hydraulic steering gear.

Fig 4: Identifying Special Tool (32 1 1021) And (32 1 1022)

Courtesy of BMW OF NORTH AMERICA, INC.