61 35 030 Removing and installing (replacing) power module

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Take off cover for control units (1).

NOTE: Make sure cover for control units (1) is correctly seated on locating pins (2).

Fig 1: Locating Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove power module (2) in direction of arrow from mounting for control units (3).

Fig 2: Removing Power Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: