61 35 125 Removing and installing/replacing body module

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

NOTE: Open glovebox.

Unclip pin (1) from retaining strap (2).

Fig 1: Identifying Pin From Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Identifying Pin From Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Open rotary clips (1) and remove.

Remove cover (2) in direction of arrow.

Fig 3: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull fuse holder (2) back slightly.

Fig 4: Pulling Fuse Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Unlock catches (3) in direction of arrow and remove body module (2) from equipment carrier (4).

Fig 5: Removing Body Module From Equipment Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Check printed-out or noted-down settings for car and key memory in CKM menu and reset if necessary