52 16... Replacing upholstery for front seat thigh support

Run thigh support forward as far as possible.

Release screws (1).

Installation note: 

Insert screws (1) with Loctite.

Tightening torque 52 10 11AZ .

Fig 1: Identifying Thigh Support Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook seat cover (1) from marked area.

Remove carrier (2) for thigh support.

Fig 2: Identifying Seat Cover And Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

For seat heating optional extra only: 

Carefully detach felt (1) from thigh support.

Unfasten plug connection (2) and disconnect.

Installation note: 

Ensure correct cable routing.

Remove upholstery from cover.

Fig 3: Identifying Plug Connection And Felt

Courtesy of BMW OF NORTH AMERICA, INC.

Move the thigh support (1) completely to the front.

Raise latch mechanisms in succession from A to D, pulling the thigh support (1) forward at the same time.

Fig 1: Pulling Thigh Support Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Insert support for thigh support in correct position in the guide and lock.

Fig 2: Inserting Thigh Support In Correct Position In Guide And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Detach welt (1) from metal tabs.

Fig 3: Detaching Welt From Metal Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Detach welt from support for thigh support.

Remove the mounting plate and foam part of the thigh support.

Fig 4: Detaching Welt From Support For Thigh Support

Courtesy of BMW OF NORTH AMERICA, INC.