32 00... Moving vehicle into design position

Necessary preliminary tasks: 

• Move VEHICLE INTO NORMAL POSITION 
• Version with air spring system: 
  • Remove ignition key
  • Pull fuse for air supply unit control unit
• Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to FRONT AXLE - RIDE HEIGHT E60 , FRONT AXLE - RIDE HEIGHT E60 LONG VERSION , REAR AXLE - RIDE HEIGHT E60 , REAR AXLE - RIDE HEIGHT E60 LONG VERSION ).

  Measure RIDE-LEVEL HEIGHT OF VEHICLE