86 10... Removing loading ramp lock

Unscrew bolts (1).

Installation:

Tightening Torque,

Fig 1: Identifying Loading Ramp Lock Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Pass lever (1) of rotary striker lock (2) out of square hole (3) by twisting from side to side.

Fig 2: Passing Lever Of Rotary Striker Lock Out Of Square Hole

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew bolts (1).

Installation:

Opening for securing clip (2) points to front or rear.

Square-head nut (3) rests with its square surface parallel to bearing pedestal (4).

Tightening Torque,

Fig 3: Identifying Securing Clip, Screws, Square-Head Nut And Bearing Pedestal

Courtesy of BMW OF NORTH AMERICA, INC.

Raise edge (1) of securing clip and slide in direction of arrow towards rear.

Detach bearing pedestal (2).

Fig 4: Sliding Securing Clip Towards Rear

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install bearing pedestal (1) on stub (3) of locking bracket (3).

Off-center bore (4) in bearing pedestal (1) points with short distance (A) to locking bracket (3).

Fig 5: Identifying Shortest Distance Of Off-Center Bore In Bearing Pedestal

Courtesy of BMW OF NORTH AMERICA, INC.