61 00... Diagnosis for Condition Based Service: Notes

NOTE: Red symbol for pre-delivery check

The vehicle is coded at the end of line so that the red symbol for the pre-delivery check is shown in the Next Service indicator (same symbol as vehicle check).

The symbol is a reminder to the Service staff that the pre-delivery check has not yet been carried out on this vehicle.

NOTE: Do not carry out a reset.

Do not confuse this function with the "Vehicle check" scope of maintenance work. Do not perform a reset via the instrument panel.

Fig 1: Lifting Vehicle For Diagnosis Using Lift

Courtesy of BMW OF NORTH AMERICA, INC.

When performing the pre-delivery check with the service function "Transport mode/pre-delivery check": The symbol is suppressed automatically after carrying out the service function.

Fig 2: Diagnostic Sheet

Courtesy of BMW OF NORTH AMERICA, INC.

4 service functions are available in the BMW diagnosis system for maintenance:

Transport mode/pre-delivery check
CBS correction, tester data
Reset CBS
CBS vehicle data correction