32 41... Replacing level switch for Dynamic Drive fluid reservoir

Unscrew nuts.

Remove shims.

Installation:

Replace self-locking nuts.

Tightening torque, see 32 41 1AZ in 32 41 PUMP AND OIL SUPPLY .

Fig 1: Identifying Self-Locking Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Raise and/or turn fluid reservoir in order to gain better access to plug connection.

Disconnect plug connection (1).

Turn level switch (2) through approx. 45° and remove towards bottom.

Fig 2: Identifying Level Switch And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.