61 42... Removing and installing/replacing DC/DC converter
NOTE:
DC/DC converter in vehicles with automatic start-stop function.
There are two versions:
Depending on the equipment, one or both versions are installed in the M3
There are two versions:
- Without additional bracket for diesel engine vehicles
- With additional bracket for gasoline engine vehicles
Depending on the equipment, one or both versions are installed in the M3
IMPORTANT:
Read and comply with INFORMATION ON PROTECTION AGAINST DAMAGE FROM ELECTROSTATIC DISCHARGE .
Necessary preliminary tasks::
Remove LOWER SECTION OF MICROFILTER HOUSING
Unlock fasteners (1) from below and slide upwards approx. 10 mm.
Unlock locks (2) in direction of arrow.
Remove cover (3).
Release lugs in direction of arrow. Remove DC/DC converter (1) by pulling upward. Disconnect plug connection (2).