41 00... Notes On Adhesive K6
- Country-specific safety and industrial safety regulations.
- Material safety data sheet of manufacturer.
- Processing instructions on glue cartridge.
Storage
Dry at 15°-25°C.
Shelf life
The glue cartridge is marked with a date.
Do not use the adhesive after this date.
Surface pre-treatment .
See vehicle-specific repair instructions.
Required cartridge gun .
OVERVIEW OF GLUE CARTRIDGE GUNS .
Preparing the glue cartridge .
Do not prepare the glue cartridge until just before applying the adhesive .
The working temperature of glue cartridge must be at least 18°C.
Pot life of adhesive is approx. 10 minutes at 25°C.
Insert glue cartridge into cartridge gun, remove cap and allow both adhesive components to emerge. Strip adhesive components uniformly and attach mixing tube. Only use mixing tubes supplied with glue cartridge.
Before starting to apply adhesive, allow approx. 1 mixing tube length of mixed adhesive to emerge. Only then apply the mixed adhesive to one side of the bonding surface.
Opened cartridges may be used again before the expiry date as long as a new mixing tube is used.
2-component adhesive application
Read the vehicle-specific repair instructions to determine the thickness and positioning of the adhesive bead.
Hardening time
See vehicle-specific repair instructions.
Disposal of adhesive
Hardened adhesive is disposed of as normal waste.
Empty glue cartridges are disposed of as normal waste.
Non-hardened adhesives and mixtures of adhesive and solvent and the like must be disposed of as hazardous waste.
These regulations apply to the Federal Republic of Germany .
For other countries, comply with the (possibly differing) nationally applicable regulations .