Customer experience: Active steering deactivated Check Control message

If this Check Control message appears together with the following MMI text:

• Active steering deactivated
• Modified steering behavior
• Steering wheel might be at an angle
• Driving can continue
• Steer carefully

And, if a fault entry is not stored in the fault memory, this is a temporary fault.

Possible fault causes:

• Skidding
• Engine stalled
• Vehicle moving with engine switched off 

The active steering is not  faulty.

The information memory can also be checked by calling up the following procedure via the function structure:

B3241_WNAFS_EL - TSP experience CC message active steering faulty, information memory

(02 Chassis and suspension | Steering | [! ] Current fault patterns | Check Control message: active steering deactivated)

In the event of temporary faults, the following information fault memory codes are stored in the information memory:

• 7014 (decimal: 28692)
• 704E (decimal: 28750)
• 704F (decimal: 28751)
• 7050 (decimal: 28752)
• 7021 (decimal: 28705)