LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2012 >> 335xi Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair - E92 >> Front And Rear Window >> 61 35... Overview, Rain Sensor (Additional Work When Replacing The Windscreen/Sensor Replacement) >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 35... Overview, Rain Sensor (Additional Work When Replacing The Windscreen/Sensor Replacement): Notes

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor/Encoding/programming necessary When replacing the sensor/Initialization required Connecting the diagnosis system required
Condensation sensor square 30 x 20 mm Yes No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes - Yes Yes
RLS approximately ø 50 mm No (new substitute visuals  required, refer to OVERVIEW OF CONSUMABLES ) - No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
RLPSS (Rain, light and precipitation solar sensor) (Designation is located on the back of the sensor) approximately ø 50 mm Yes Yes - Yes Yes
RLS (vehicle with no HUD  ) (Designation is located on the back of the sensor) approximately ø 50 mm No (new substitute visuals  required, refer to OVERVIEW OF CONSUMABLES ) - No Yes Yes
RLSS (vehicle with HUD  ) (Designation is located on the back of the sensor) approximately ø 50 mm Yes Yes - Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing substitute visuals Encoding/programming necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types approximately ø 35 mm No No - Yes Yes
all types approximately ø 50 mm Yes Yes - Yes Yes
Only for F25:  RLS approximately ø 50 mm No (new substitute visuals  required, refer to OVERVIEW OF CONSUMABLES ) - No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types approximately ø 35 mm No No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Encoding/programming necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all up to 03/2014  except SBS (01) (Designation is located on the back of the sensor) approximately ø 35 mm No No Yes Yes
SBS (01) (Designation is located on the back of the sensor) approximately ø 35 mm No No No No
All from 03/2014  approximately ø 35 mm No No No No