LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2012 >> 740Li >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Driver Information Systems -- Overview >> BMW Night Vision 2 >> Service Information >> Programming and Coding >> Initializing Software
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initializing Software

When replacing the camera, it is always necessary to initialize the software by entering an enable code (FSC).

NOTE: The vehicle identification number (VIN) must always be entered when ordering a new camera or a new control unit.

The camera is programmed by through of the control unit. The control unit receives the programming data for the camera through PT-CAN. The control unit forwards this data to the camera through the "private CAN-bus".

scientia non olet · About LEMON Manuals