13 62 607 Replacing pulse generator on transmission

Necessary preliminary tasks:

Read out fault memory of DME control unit; if necessary, work through test schedules.
Switch off ignition.
Remove underbody protection . See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION or 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .

IMPORTANT: Oil emerges when the pulse generator is removed. Catch oil in a suitable container and dispose of this oil in accordance with country-specific regulations.

Unlock connector and remove.

Release screw (1).

Remove pulse generator.

Fig 1: Identifying Pulse Generator Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TOP UP TRANSMISSION FLUID .
Now clear the fault memory.
Add final details to vehicle.