32 31 003 Removing And Installing/Replacing Upper Section Of Steering Column Trim

Special tools required:

Move steering column in "bottom" and "extended" position.

IMPORTANT: Risk of damage!
Unclip steering column shroud (1) at side with special tool 00 9 323 .

Fig 1: Removing Steering Column Shroud

Courtesy of BMW OF NORTH AMERICA, INC.

Tilt steering column trim (1) towards front.

Unclip steering column gap cover (2) from steering column trim (1).

Installation:

Tilt steering column trim towards rear, align by way of locks to lower section (of steering column trim) and press down.

Fig 2: Locating Steering Column Gap Cover Screws From Steering Column Trim

Courtesy of BMW OF NORTH AMERICA, INC.