LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2013 >> 528i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Memory Modules >> General Electrical System - Repair >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... In-line plugs, 6- to 50-pin, System Elo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 13... In-line plugs, 6- to 50-pin, System Elo

Open lock.

Fig 1: Opening Lock
G05478489Courtesy of BMW OF NORTH AMERICA, INC.

Detach cable strap.

Installation note: 

Cable strap must be reinstalled.

Fig 2: Locating Cable Strap
G05478490Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from connector housing (2).

Fig 3: Detaching Catch From Connector Housing
G05478491Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Pressing Contact Carrier With Wiring Harness Through Opening
G05478492Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Detaching Catch From Connector Housing
G09928602Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Pulling Cable Of Contact Carrier
G05478494Courtesy of BMW OF NORTH AMERICA, INC.