Functional networking
A complex composite system with distributed functions in other control units is necessary for the implementation of vertical dynamics management. The following graphic shows the system network.
| Item | Explanation |
|---|---|
| 1 | Damper satellite, front left (EDCSVL) |
| 2 | Front left ride height sensor |
| 3 | Dynamic stability control (DSC) |
| 4 | Front right ride height sensor |
| 5 | Damper satellite, front right (EDCSVR) |
| 6 | Junction Box Electronics (JBE) |
| 7 | Front fuse and relay module |
| 8 | Damper satellite, rear right (EDCSHR) |
| 9 | Rear right ride height sensor |
| 10 | Center console operating facility |
| 11 | Vertical Dynamics Management control unit |
| 12 | ICM control unit |
| 13 | Footwell module (FRM) |
| 14 | Rear left ride height sensor |
| 15 | Damper satellite, rear left (EDCSHL) |
| 16 | Central gateway module (ZGM) |
NOTE:
New update procedure!
In the next generation of Integrated Chassis Management (ICM), only the center console operating facility is connected to the ICM. Observe wiring diagrams in diagnosis system!