Information on Check Control messages

The following warnings and their causes can appear as Check Control messages in the CID:

Message: Driving comfort restricted! 

The following warning message indicates that Dynamic Drive has been deactivated:

• Driving comfort restricted!

Important notice: The vehicle will exhibit more body roll during cornering than a vehicle without Dynamic Drive. Precondition for continued driving to the next workshop:

• Reduce cornering speed.
• No significant oil loss.

Possible causes of the warning message:

• Defect on the front axle pressure sensor
• Defect in the pressure build-up (pump)
• Defect in at least one active stabilizer bar
• Fault in the Dynamic Drive

In order to be able to pinpoint the cause more exactly, read the fault memory and run through the displayed test plan. When the fault has been remedied, delete the fault memory.