LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2015 >> 528i >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATEQ TPMS Reset Procedure

NOTE: Reset the TPMS after each correction of tire inflation pressures and after every tire or wheel change.
  1. Set the tire pressure of all wheels to specified pressure.
  2. Using the Control Display, select Vehicle Info -> Vehicle Status -> Perform Reset.
  3. Start the engine - do not drive away.
  4. Reset the TPMS using "Perform Reset".
  5. Drive vehicle for a short period of time at more than 19 mph (30 km/h).
  6. On the Control Display, the tires are shown in gray and the status is displayed.
  7. When the wheels on the Control Display are shown in green and "Tire Pressure Monitor (TPM) active" is displayed, Reset has successfully completed.
NOTE: The trip can be interrupted at any time. The reset procedure resumes automatically when the vehicle is driven again.
scientia non olet · About LEMON Manuals