32 43 010 Removing and installing/replacing control unit for active front steering: Notes
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Necessary preliminary work:
- Disconnect BATTERY EARTH LEAD
- Release LEFT FRONT SEAT and tilt towards rear
- Remove front left DOOR SILL COVER STRIP
- Remove footwell SIDE TRIM PANEL on A-pillar
- Remove cover of BASS SPEAKER at left front
Fold back front left carpet to one side.
Unscrew nuts (1).
Tightening torque 32 43 1AZ .
Installation note:
Secure grounding strap (2) to screw fastening point.
Release screws (1).
Tightening torque 32 43 2AZ .
Disconnect plug connections (1) and remove control unit.