61 13... Circular connector, 13-pin, system D2.5

Pull off rubber grommet (1).

Carefully pull out lock (2) in direction of arrow.

Fig 1: Identifying Lock And Rubber Grommet

Courtesy of BMW OF NORTH AMERICA, INC.

Move lower section of connector (3) in direction of arrow until retaining lugs (4) snap into release groove (5).

Fig 2: Identifying Connector, Retaining Lugs, And Locking Groove

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Sliding Internal Connector

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 , press down retaining lugs (6) of corresponding contact and pull out cable.

Fig 4: Identifying Retaining Hook And Special Tool 61 1 132

Courtesy of BMW OF NORTH AMERICA, INC.