61 13... Circular connector, 13-pin, system D2.5

Special tools required:

Pull off rubber grommet (1).

Carefully pull out lock (2) in direction of arrow.

Fig 1: Pulling Circular Connector Rubber Grommet (13-Pin, System D2.5)

Courtesy of BMW OF NORTH AMERICA, INC.

Move lower section of connector (3) in direction of arrow until retaining lugs (4) snap into release groove (5).

Fig 2: Moving Circular Connector Lower Section

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303, press down retaining lugs (6) of corresponding contact and pull out cable.

Fig 3: Pressing Contact Retaining Lugs Using Special Tool (61 0 303)

Courtesy of BMW OF NORTH AMERICA, INC.