61 13... Crimping Micro Power Quadlock contacts (MPQ)

Special tools required:

To crimp MPQ contacts, use hand pliers 61 4 321 (1) in conjunction with crimping head 61 4 325 (2) from crimping set 61 4 320 .

NOTE: Hand pliers (1) open automatically until limit position when handles are pressed together.

Fig 1: Crimping MPQ Contacts Using Hand Pliers (61 4 321)

Courtesy of BMW OF NORTH AMERICA, INC.

Open hand pliers (1).

NOTE: Place contact (2) with utmost care in designated nest (observe line cross-section) in crimping head (3). Make sure it is exactly positioned.

Place MPQ contact (2) in crimping head (3).

Close hand pliers (1) one notch.

Fig 2: Identifying Hand Pliers With Crimping Head And MPQ Contact

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Follow procedure for CUTTING AND STRIPPING INSULATION from cables.

Insert stripped cable (2).

Close hand pliers (1) fully.

Open hand pliers (1) and remove cable (2).

IMPORTANT: Check contact for correct crimping.

Fig 3: Inserting Stripped Cable Using Hand Pliers

Courtesy of BMW OF NORTH AMERICA, INC.