61 00 730 Encode/program control unit(s)

TECHNICAL INFORMATION 

Use the most recent software version to prevent faults during programming/encoding.

The battery voltage must not fall below 13.0 V during programming.

Use chargers recommended by BMW only.

• Connect the battery charger to the vehicle.
• Connect the programming system with the vehicle.
• Determine the action plan.
• Accept and fully process the measures plan.
• If applicable, connect the workshop system to the motor vehicle, depending on the reworking list.
• Carry out vehicle test.
• Delete the fault memory.
• The information about programming the workshop system and the corresponding notes in the user documentation must be
• Wait until programming/encoding has been completed.
• Disconnect the programming system from the vehicle.
• Disconnect the battery charger from the vehicle.