61 31... Remount operating unit for additional seat function (clipped version)

Necessary preliminary tasks: 

• Refer to: OPERATING UNIT OF ADDITIONAL SEAT FUNCTION 

Removal: 

Release all latch mechanisms on the operating unit (1) using screwdriver (3-mm blade).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out the operating unit (1) from the rear panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the button (1) using screwdriver (2) and pull out forwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Fit the memory button to the operating unit and press to lock into place.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Ensure keypads (1) are seated correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Fit the operating unit (1) to the rear panel (2) and press to lock into place.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Remove operating unit of additional seat function