61 31... Remount operating unit of the additional seat function (screwed version)

Necessary preliminary tasks: 

• Refer to: OPERATING UNIT OF ADDITIONAL SEAT FUNCTION 

Removal: 

Release all screws by means of screwdriver (1) on the operating unit (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the rear panel (1) and feed out the printed circuit board (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Take out the pressure pin (1) from the operating unit (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip button (2) with the help of screwdriver (1) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Add the button (1) to the operating unit (2) and lock using pressure.

Courtesy of BMW OF NORTH AMERICA, INC.

Add pressure pin (1) to the operating unit (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Add the printed circuit board (2) and then the rear panel (2) to the operating unit.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten all screws on the operating unit (2) with the help of screwdriver (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Remove operating unit of additional seat function