61 13... In-line connectors, 30-pin, Hybrid System MQS/MPQ

Manufactured by AMP:  The following contact types without single conductor seal can be fitted in the connector housings:

• MQS (Micro Quadlock System)
• MPQ, width 2.8 mm (Micro Power Quadlock)
• MPQ, width 5.2 mm (Micro Power Quadlock)

Socket housing: 

Raise lock (1) on housing (2).

Push contact carrier (3) out of housing (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down snap-in hooks (1) of contact bushing in opening of contact carrier with a small screwdriver.

Pull wire with contact bushing in arrow direction as far as secondary lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down snap-in hooks in secondary lock (1) again and pull cable with contact bushing (2) completely out of contact carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Pin housing: 

Contacts 1... 13 and 19... 27: 

Raise locking slide (1) on both sides (2) of housing and detach.

Courtesy of BMW OF NORTH AMERICA, INC.

Contacts 14... 18 and 28... 30: 

Pull slide (1) outwards completely.

Raise lock (2) on housing.

Pull contact carrier (3) out of housing.

Courtesy of BMW OF NORTH AMERICA, INC.

The pin contacts are pulled out of a contact carrier as described under "Socket housing".