41 00... Opening Bonded Connections
- Opening spot-welded adhesive joint
Open welding spots. See 41 00... Opening welded connections .
WARNING: Extract vapors and gases.
Use personal protective clothing/equipment.Heat connecting flange with a hot air blower. Heat components to max. 250°C object temperature.
Release connecting flange with chisel.
Remove adhesive residue from connecting flange.
- Opening bonded connections
If necessary, open existing punch or blind rivets. See 41 00... Opening rivet connections .
Roughly cut out damaged component.
WARNING: Extract vapors and gases.
Use personal protective clothing/equipment.Heat adhesive flange with a hot air blower. Heat components to max. 250°C object temperature.
The component can be peeled with the aid of pliers. Do not damage adjacent components.
Remove adhesive residue from connecting flange.
- Opening bonded connections on aluminum roofs
Procedure is described in detailed in the relevant repair instructions.
- Opening bonded connections on carbon-fiber-reinforced plastic parts
Procedure is described in detailed in the relevant repair instructions.