Brightness control

Due to the Black Panel technology, the instrument panel is always illuminated as of terminal R. The status of the vehicle lights and the ambient brightness determine the switch between daytime and night-time illumination. A phototransistor is installed in the instrument panel to calculate the necessary brightness (display, indicator and warning lights, scales, needles).

The brightness value calculated in the instrument panel is transmitted to the bus system (e.g., for the Central Information Display). Dimming can be set individually using the rheostat wheel on the light switch. When the vehicle lights are switched on, these individual settings and the phototransistor are used to control the dimming. When the vehicle lights are switched off, the dimming is only controlled by the phototransistor (display brightness according to ambient brightness).