61 35... Removing and installing/replacing the Car Sharing Module

Special tools required:

2 354 571

NOTE: Use the ignition key for service-relevant journeys or activities with a car sharing vehicle. Do not book journeys. The Car Sharing Module is located in the center armrest.

Open lid of center armrest (1). Insert special tool 2 354 571 in Car Sharing Module (3) as shown and press down.

Remove Car Sharing Module (3) from base plate (2).

Replacement:

After installing a new Car Sharing Module, proceed as follows:

Lock vehicle with ignition key.
Wait until the green LED on the external reader lights up.
(The external reader is located on the windscreen in the bottom left corner in the direction of travel.)

Fig 1: Removing Car Sharing Module From Base Plate

Courtesy of BMW OF NORTH AMERICA, INC.