61 13... Circular connector, 7-pin, 8-pin, system D2.5

Special tools required:

Carefully pull off rubber grommet (1).

Carefully press back retaining tabs (2) of internal connector (3).

Fig 1: Pressing Internal Connector Retaining Tabs (7 And 8 Pin System D2.5)

Courtesy of BMW OF NORTH AMERICA, INC.

Slide internal connector (3) in direction of arrow until retaining tabs (2) lock into locking groove (4).

Fig 2: Sliding Internal Connector (7 And 8 Pin System D2.5)

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 61 0 303 (61 1 132) to press back retaining hook (5) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Back Retaining Hook Of Corresponding Contact

Courtesy of BMW OF NORTH AMERICA, INC.