Install the BDC control unit

• Feed the BDC control unit (2)  into the holder (3)  in the arrow direction.
• Engage the BDC control unit (2)  into the detent (1)  .
• Connect all connectors and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cover (3)  in the arrow direction and engage it into the detents (2)  .
• Position the carpet (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the power distribution (2)  upwards and engage it correctly into the detents (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
• Refer to INSTALLING RIGHT DOOR SILL COVER STRIP .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to CONNECTING NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to ENCODE/PROGRAM CONTROL UNIT(S) .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to INITIALIZE COMPONENT PROTECTION .