LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2022 >> iX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> General Electrical System (2 Of 2) -- Repair (IX) >> 61 35 Control Units, Modules >> Overview, rain sensor (additional work when replacing the windshield/sensor replacement)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overview, rain sensor (additional work when replacing the windshield/sensor replacement)

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor/Programming/coding necessary When replacing the sensor/Initialization required Connecting the diagnostic system required
Condensation sensor square 30 x 20 mm Yes No No No
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing substitute visuals Programming/coding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes - Yes Yes
RLS approximately ø 50 mm No
(new substitute visuals  required, refer to applicable BMW parts catalogue)
- No Yes Yes
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing substitute visuals Programming/coding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnostic system required
RLPSS (Rain, light and precipitation solar sensor)
(Designation is located on the back of the sensor)
approximately ø 50 mm
Yes Yes - Yes Yes
RLS (vehicle with no HUD  )
(Designation is located on the back of the sensor) approximately ø 50 mm
No
(new substitute visuals  required, refer to applicable BMW parts catalogue)
- No Yes Yes
RLSS (vehicle with HUD  )
(Designation is located on the back of the sensor)
approximately ø 50 mm
Yes Yes - Yes Yes
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes Yes Yes
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing substitute visuals Programming/coding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnostic system required
all types
approximately ø 35 mm
No No - Yes Yes
all types
approximately ø 50 mm
Yes Yes - Yes Yes
Only for F25: 
RLS approximately ø 50 mm
No
(new substitute visuals  required, refer to applicable BMW parts catalogue)
- No Yes Yes
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types
approximately ø 35 mm
No No No No
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all up to 03/2014  except operating fluid (01)
(Designation is located on the back of the sensor)
approximately ø 35 mm
No No Yes Yes
Operating fluid (01)
(Designation is located on the back of the sensor)
approximately ø 35 mm
No No No No
All as from 03/2014 
approximately ø 35 mm
No No No No
Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types No No No No

BMW i: 

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types
approximately ø 35 mm
No No No No

BMW  from G series 

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types No No No No

MINI (all): 

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types
square 60 x 40 mm
No Yes Yes Yes
all types
approximately ø 35 mm
No No No No

Rolls-Royce: 

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types
square 60 x 40 mm
No Yes Yes Yes
all types
approximately ø 35 mm
No No Yes Yes
all types
approximately ø 50 mm
Yes Yes Yes Yes

Rolls-Royce: 

Sensor type/Sensor shape With windshield replacement -- replacement sensor required When replacing the sensor -- Programming/coding necessary When replacing the sensor -- Initialization required Connecting the diagnostic system required
all types
approximately ø 35 mm
No No No No