Install the BDC control unit

• Feed the BDC control unit (2)  into the holder (3)  in the arrow direction
• Engage the BDC control unit (2)  into the detent (1) 
• Connect all connectors and lock

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cover (3)  in the arrow direction and engage it into the detents (2) 
• Position the carpet (1) 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the power distribution (2)  upwards and engage it correctly into the detents (1) 

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
• Refer to INSTALLING THE RIGHT DOOR SILL COVER STRIP .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to RECONNECTING ALL BATTERY GROUND LEADS .
• Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to INITIALIZING COMPONENT PROTECTION .