LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1983 >> Skylark T-Type, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Wheel Alignment Specifications & Procedures) >> Alignment Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Alignment Specifications

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1983 Pontiac Grand Prix, 1983 Pontiac Bonneville, 1983 Oldsmobile Ninety-Eight, 1983 Oldsmobile Cutlass, and 1983 GMC Caballero. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (REGAL)

Application Specification
Caster (Degrees) (1) 3 +/- 1/2
Camber (Degrees) + 1/2 +/- 1/2
Toe-in (Inches) 1/8 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Maximum side-to-side difference 1/2°.
WHEEL ALIGNMENT SPECIFICATIONS (DEVILLE)

Application Specification
Caster (Degrees) + 3 +/- 1/2
Camber (Degrees) + 1/2 +/- 1/2
Toe-in (Inches) 3/32 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (CAPRICE, CABALLERO, EL CAMINO, IMPALA, MONTE CARLO, MALIBU)

Application Specification
Caster (Degrees) (1) + 3 +/- 1/2
Camber (Degrees) + 3/4 +/- 1/2
Toe-in (Inches) 1/8 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Maximum side-to-side difference 1°.
WHEEL ALIGNMENT SPECIFICATIONS (NINETY-EIGHT)

Application Specification
Caster (Degrees) (1) + 3 +/- 1/2
Camber (Degrees) (1) + 3/4 +/- 1/2
Toe-in (Inches) 1/8 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Maximum side-to-side difference 1/2°.
WHEEL ALIGNMENT SPECIFICATIONS (CUTLASS)

Application Specification
Power Steering
Caster (Degrees) + 3 +/- 1/2
Camber (Degrees) + 1/2 +/- 1/2
Toe-in (Inches) 1/8 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
Manual Steering
Caster (Degrees) + 1 +/- 1/2
Camber (Degrees) 1/2 +/- 1/2
Toe-in (Inches) 3/16 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (BONNEVILLE & GRAND PRIX)

Application Specification
Caster (Degrees) (1) 3 +/- 1/2
Camber (Degrees) + 1/2 +/- 1/2
Toe-in (Inches) + 1/16 +/- 1/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Maximum side-to-side difference 1°.
scientia non olet · About LEMON Manuals