BCM Input Parameters:
- BI01
Panel light switch display is LO when panel light switch is in ON or MAX position.
- BI02
Park light switch display is LO when park light switch is in OFF position.
- BI03
Driver door ajar switch display is LO when driver's front door is ajar.
- BI04
Passenger door ajar switch display is LO when passenger's door is open.
- BI05
Door jamb switch display is LO when any door is open.
- BI06
RKE WAKE UP display is LO when an unlock signal is recognized by the RKE receiver module.
- BI08
Low refrigerant pressure switch display is LO when system is low on refrigerant.
- BI09
Washer fluid level switch display is LO when vehicle is low on washer fluid.
- BI16
Key in ignition display is LO only when key is in LOCK position. (With ignition on, display will always read HI.)
- BI21
Low brake fluid display is LO when brake fluid is low.
- BI22
Parking brake switch display is LO when parking brake is applied.
- BI25
Seat belt switch display is HI when driver's seat belt is fastened.
- BI51
Generator feedback display is LO when there is a generator problem or engine is not running.
- BI78
Headlights display is HI whenever headlight switch is on.
- BI79
High beam switch display is LO as long as lever is pulled in.
- BI82
Twilight enable switch display is LO whenever twilight sentinel headlight switch is on.
- BI88
Low oil level switch display is HI when engine oil level is low.