Keyless Entry Transmitter Battery: Service and Repair

Remote Control Door Lock Transmitter Assembly (Typical):

Remove or Disconnect

1. Keyring from transmitter assembly.
2. Screw from bottom cover, if equipped.
3. Top cover from bottom cover, using flat-bladed tool at eyelet end to unsnap, if necessary.
4. Batteries.

Install or Connect

NOTICE: Use of wrong type of battery will cause damage to the transmitter assembly.

1. Batteries.
^ Use battery type DL2016, or equivalent.
2. Top cover by snapping into bottom cover.
3. Screw to bottom cover, if equipped.
4. Keyring to transmitter assembly.

Inspect
^ Transmitter assembly operation.