LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1997 >> Regal GS >> Repair and Diagnosis >> Steering >> Power Steering >> Power Rack & Pinion Steering System >> Torque Specifications
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Adjuster Plug Lock Nut 50 (68)
Engine Frame-To-Body Bolts (1) 125 (170)
Inner Tie Rod-To-Rack 74 (100)
Pinion & Valve Assembly Lock Nut 26 (35)
Pressure Line Fitting (Hydraulic Union) 56 (76)
Pump Mounting Bolts 20 (27)
Rack & Pinion Mounting Bolt/Nuts 59 (80)
Steering Shaft Lower Coupling Pinch Bolt 35 (47)
Tie Rod Adjusting Hex Lock Nut 52 (71)
Tie Rod End Castle Nut (2)(3)
Wheel Lug Nuts 100 (136)
(1) Install NEW bolts whenever bolts are loosened or removed.
(2) To align cotter pin holes, tighten nut a minimum of 35 ft. lbs. (47 N.m) and a maximum of 52 ft. lbs. (71 N.m). DO NOT back off nut to align cotter pin holes.
(3) Tighten to 18 ft. lbs. (25 N.m), then an additional 180 degrees.