PASSLOCK(R) Learn Procedures
WARNING: This page is about a different car, the 1999 Pontiac Grand Am and 1999 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the Passlock(R) learn procedure when the Passlock(R) sensor, BCM or PCM have been replaced. Program replaced module before programming Passlock(R).
- Turn ignition ON.
- Turn ignition to CRANK, and then back to ON without starting vehicle.
- Observe SECURITY indicator for 10 minutes.
- After ignition has been on for 10 minutes, the SECURITY indicator will switch from on to off.
- Using scan tool, clear DTCs.