Electronic Brake Control Relay Replacement

REMOVAL PROCEDURE





1. Remove the l/P sound insulator panel. Refer to Instrument Panel, Gages and Console in Body and Accessories.
2. Release the electronic brake control relay (2) from the EBCM/EBTCM bracket (1).
3. Remove the electronic brake control relay connector.

INSTALLATION PROCEDURE





1. Install the electronic brake control relay connector.
2. Slide the electronic brake control relay (2) into the EBCM/EBTCM bracket (1) until the electronic brake control relay is secure.
3. Install the l/P sound insulator panel. Refer to Instrument Panel, Gages and Console in Body and Accessories.