LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1999 >> Regal GSE >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Transmitter >> Manual Programming
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Manual Programming

  1. Sit in drivers seat and remove ignition key from ignition switch.
  2. Close all doors and press and hold UNLOCK button on door lock switch.
  3. While holding UNLOCK button on door lock switch, insert and remove ignition key from ignition switch 2 times. Do not turn ignition switch.
  4. Insert ignition key a third time. Leave ignition key in ignition switch and switch in LOCK position for remainder of programming.
  5. Release door lock switch. 3 chimes will be heard indicating transmitter programming is active.
  6. Press and hold LOCK and UNLOCK buttons at the same time on keyless entry transmitter for 12 seconds. Two chimes will be heard indicating transmitter has been successfully programmed.
  7. Repeat step  6 for up to 4 transmitters. To end procedure, remove ignition key from ignition switch.
scientia non olet · About LEMON Manuals